Get personal help with your studies from any of the 45,000 experienced experts on Studybay

  • No intermediaries
  • No plagiarism
  • Any Subject
  • Always on time

Here’s an example of project completed by our experts:

Lab Report (Example)

Document Preview:

Class Number: Lab Number: Title of Lab: Name of Student: ID of Student Group Number: Date of Experiment Cover Letter This study was done in investigating the Saturation Pressure of a Binary System with the use of a PVT Simulator. Carbon (IV) Oxide (CO2) and Butane (C4H10) were used as the components to carry out this experiment. The study involved first comprehending the impact of altering the CO2 and C4H10 binary composition without change in temperature. When the study carried out the PVT lab simulator was utilized to get the required data. From the manual provided table 4-a from group 1 was put in use and the temperature throughout the experiment was maintained at about 900F. The quantity of butane which has no gas in it as used in this investigation was 10cc.The pressure was maintained at 2000psi under a close margin of (+/-10). During the early step of and that mercury cannot be compressed. The constant temperature of 900F that was used by the group was slightly more than the critical temperature of Carbon IV Oxide that is pure. Conclusion It was evident in this investigation the bubble point is proportional to a mole fraction of CO2. This meant that a mole fraction increment directly led to an increment in the bubble point. It was also necessary to note that a critical point occurs if no extra liquid or gas were formed In conclusion the experiment showed the effect of altering Co2 concentration in the mixture with butane. This information is critical in showing how mixtures behave under different compositions. References McCain William D. The Properties of Petroleum Fluids. 2nd ed. Tulsa OK: PennWell 1990. Print retrieved 18 February 2017. Lab manual-“Single component study using the PVT simulator”. PNGE332-Petroleum Property and Phase Behaviour retrieved 18 February 2017. [...]

Order Description:

Okay so this is simple, even though it looks complicated. I will upload my friend's previous semester Lab report and one other report from the same semester to help you paraphrase and get the idea of the actual lab and how we have to do it. PLEASE, read both labs before doing it! It is very important that my lab do not match with these labs since my professor uses a software which can tell if it is copied. If you will use the internet, please put references in the last page of the report.

Subject Area: Engineering

Document Type: Proofreading

This project has already been completed by one of the Studybay experts. The client rated this project:

Project's rating is 5/5

Price $40

Words 1375

Pages 5

Completed in 4 days

Expert Josh N

Client Review

If you are wanting to get your stuff done in great quality, then this is your writer.

Positive
02.21.2017

Similar projects

Subject of the project is Engineering   Type of the project is Proofreading

Internship Initial report

Subject of the project is Engineering   Type of the project is Proofreading

Recommendation Report

Need Help With a Project on This or Another Topic?

Cooperate with seasoned experts directly — create your project now and start getting help in 2 minutes.

Studybay top experts

Reviews from Studybay Community

  • Our Studybay rating is:
    4.9
  • Our ReviewCentre rating is:
    4.8
  • Our SiteJabber rating is:
    4.5