Users reviews
We accept

Great science fair projects ideas

Sooner or later this day will come and you’ll be assigned the first of science fair projects, saved specially for you. But you haven’t been assigned it yet, so you have enough time to understand the very essence of your upcoming assignment.

To cut a long story short, a science fair experiment can be defined as a competition where contestants are welcome to present their exclusive science project results in the form of a display board, report or corresponding models. Obviously, science fair projects enable learners to try their hand in science as well as technology activities. Secondly, science fair projects give them an excellent opportunity to compete with their classmates in terms of intelligence. In spite of the fact, writing assignments, which require several drafts and a great deal of time are quite widespread in American schools, it’s unlikely that you’ll be assigned a large project. Apparently, science fair projects provide students with strong interest in the sciences with an effective mechanism to be paired with advisors from nearby universities and colleges, so they could gain access to instruction as well as equipment regular schools can hardly offer. In America, science fair projects firstly gained popularity in the beginning of the 1950s. To be exact, science fair projects were firstly promoted and popularized by the National Science Fair or ISEF. Well, that sounds a bit cynical, but exactly the use of the first nuclear weapons in Nagasaki and Hiroshima sparked sincere interest in the sciences. Then, the dawn of television also powered this curiosity. After a while, the launch of the first Russian satellite Sputnik brought science fiction to reality. From that moment science fair projects have been being accumulating new followers.

A common approach to science fair projects: what you should know

Most probably, the first of your science fair projects is going to be long. It’s up to you to have it chunked into bite-size pieces. This approach will enable you to do at least one piece or several every day, thus moving to the end of the project gradually. In most cases, science fair projects require at least two weeks to complete.

Secondly, you require checking your ink cartridge, as you need various colors for your tables, charts and graphs.

Keep saving your writing work every five minutes. Otherwise, you might lose it at any moment due to a sudden glitch on your PC.

Mind your grammar and spelling. Check it at the end of every working day. Once the first version is over, print it out and proofread. You’ll most likely notice a bunch of bugs and there make all the necessary changes. That’s your draft, so don’t neglect writing your suggestions in the margin. They won’t be in the final version, but they’ll help you anyway.

Must-have sections of all science fair projects

  • The title page: In simple terms, in the center of your page you require writing your project title, your grade, name and date. In some case, just one title would be enough. Your title needs to grab the audience’s attention and hold it tight.
  • Table of contents: That’s the second page of your science fair project. Specify a page number in front of the name of every section.
  • Abstract: Here you’re expected to provide a concise overview of the project. It might require one or two paragraphs and no more.
  • Introduction: The given section should be stuffed with hypothesis and variables, and a clear explanation of what actually prompted your scientific research and what you counted on.
  • Background research: Here you’re expected to mention your research paper written by you before this experiment.
  • Materials list: It’s clear that all the lists employed by you need to be listed.
  • Experimental procedure: You should thoroughly describe the method employed to collect data and make observations. Your readers expect you to explain every detail clearly enough to repeat your experiment if required. Provide all the necessary charts, drawings, data and graphs.
  • Discussion and data analysis: The given section traditionally includes all the necessary measurements and data regarding your experiment along with charts, drawings and graphs. Your discussion is expected to explain your results. The results should be compared with published data collected for your research.
  • Conclusion: Here you should summarize your results.
  • Acknowledgments: Provide a concise statement, enumerating the names of folks who helped you. Thank them for their contribution.
  • Bibliography: As the name suggests, the given section is stuffed with magazines, books, articles, interviews utilized in your research.

Great science fair project ideas

Well, we’ve just gotten familiar with the basic requirements to your science fair project, but you can hardly succeed with it if you have no idea what to write in your work. Here below you’ll find a bunch of worthy ideas for your project. All of them boast practical relevance in real life, so you won’t be another banal work generator.

How a barometer works

That’s one of the most promising project ideas, involving taking something real apart to figure out how this stuff works. Perhaps, you’ve already seen regular barometers, making use of dials to read pressure. Have you ever thought how they work? Fortunately, it’s quite easy to give a full answer. You just require taking a barometer apart and you’ll see the solution with your own eyes.

In simple words a partially evacuated sealed metal chamber reacts to every change in air pressure by flexing. Exactly this flexing is used for moving delicate levers attached by means of a complex mechanism to a dial. Respectively, when the air pressure changes, it makes the dial turn. As you might have guessed the dial is already calibrated in the required way. Your challenge here might involve describing the movement of the dial with the help of mathematical terms.

Apart from that you can research whether the dial is capable of turning following changes in air temperature when there aren’t any changes in air pressure.

Homemade air conditioner

That’s an undoubtedly great project, especially for hot summer months. Make an air conditioner with your own hands, as it’s the best way to explore how it works.

For this project you’ll require a 20 liter plastic container. You should insert a flattened metal tube through your container. After this have the interface between the plastic container and tube sealed with silicone. Do this if you don’t want water to leak out.

The major principle here is that you simply fill your container with cold ice-water and blow air through the flattened tube with the help of a fan. In this particular case, the air exits the tube it was going in, because of heat exchange between the cold water and the air running through the tube. That’s quite clear. Then, on the end of the tube where the air goes in you require making a sort of funnel, fitting around the fan as well as channels the air goes into and through your tube. For this purpose, you can utilize a combination of old tablecloth, rubber sheet and aluminum sheet.

You’re welcome to try various fan speeds. Don’t forget to measure the temperature of the air leaving the tube. Don’t forget to compare it with the incoming air temperature. Perhaps, it makes sense to make the tube gap wider or narrow and compare results. Write down your outcomes.

More than 7 000 students trust us to do their work
90% of customers place more than 5 orders with us
Special price $10 /page
Check the price
for your assignment
Words min
Add commentaries
Type of service:
Custom writing
Academic level:
Get your $10 bonus now!
Hi! Every client is important to us, so we're giving you a $10 bonus. Create your first order and see for yourself - our service is working fine!